Saturday morning I drug Mikhaila out of bed, fed her breakfast, and then drove her thirty miles south to see if a 1964 Corvair Monza 4-door Sedan would strum her heart strings. Once we arrived at the garage where my buddy, Dave, was waiting for us, we had to move the car out from the corner where it had sat undisturbed since the 80s. After Mikhaila got a good look at the exterior with its unique overhanging rear roof and the interior with its red vinyl bucket seats in front and folded-down bench in back, she was sold. Dave then took us on a tour of the attic of this garage where Mikhaila spied a pink door and matching hood. “It’s off one of the Packards,” Dave told her. He then asked her, “wouldn’t pink and gray look good on the 4-door?” She agreed, and now I’m trying to figure out how we’ll be able to make pink and greay work with the oxblood red interior. Looks like there may be some vinyl dying and interior painting in our future.
Thrown in with the deal is the back portion of a Lakewood and some EM sheetmetal to fix the right front collision damage on the 4-door. That damage, by the way, was far less than I’d anticipated, but it will require replacing a good portion of the right front fender.
Until Mikhaila provides a suitable name, this new addition to the fleet will be called TwoTone. Now we just need to borrow a trailer (hello Jonathan) and find a Saturday or Sunday when we’re all available.
Monday, November 12, 2012
Friday, November 9, 2012
The Fleet is Pared Down Again – Possibly Temporarily
What a roller-coaster. This year has been rather tumultuous with the acquisition of Phil’s Corvair collection, and the subsequent dispersal of all but one of the five cars. The last one, YellowVert, was trailered off by her new owner Wednesday. A much better demise for a savable car than the alternative – a tow trip to the Corvair Ranch. I did, however, have to throw in the blue seats to close the deal. The buyer was scared by some rot he'd not seen in the picture. He ended up with a great deal, and now I don't need to deal with trying to sell them.
Now that I’ve got the fleet pared down, is it time to add another one? Mikhaila’s been struggling with which Corvair model will be our father-daughter project. She’s expressed a fondness for the four-door earlies, so we’ll be checking out one tomorrow morning. It’s owned by a buddy of mine at work, and has been sitting in his dad’s garage since at least the 80s. It’s a ’64 Monza, black with a white top (cool two-tone) and a red interior. While it needs some bodywork where the front end was rearranged in a collision, the car is extremely rust-free. Something I’ve not had the luxury of experiencing in the fleet since Heidi was drug out of a garage and into our lives. I hope she likes it, but, more importantly, I pray she loves it enough to tolerate working nights and weekends with her old man so it can be hers.

Now that I’ve got the fleet pared down, is it time to add another one? Mikhaila’s been struggling with which Corvair model will be our father-daughter project. She’s expressed a fondness for the four-door earlies, so we’ll be checking out one tomorrow morning. It’s owned by a buddy of mine at work, and has been sitting in his dad’s garage since at least the 80s. It’s a ’64 Monza, black with a white top (cool two-tone) and a red interior. While it needs some bodywork where the front end was rearranged in a collision, the car is extremely rust-free. Something I’ve not had the luxury of experiencing in the fleet since Heidi was drug out of a garage and into our lives. I hope she likes it, but, more importantly, I pray she loves it enough to tolerate working nights and weekends with her old man so it can be hers.
Tuesday, November 6, 2012
Too Busy to Blog
When last I posted the lovely Loriann’s daily-driver was out of commission and the wobble-fronted Suburban had been pressed into service as her mode of transportation. That’s been resolved. The Cruiser is back on the road with a new timing belt, water pump, tensioner, and idler and the Suburban is now my daily-driver instead of Heidi.
With the Cruiser work completed, Lucy’s back in the garage awaiting floor patches. I’ve been familiarizing myself with my new MIG welder. One of the jobs I used it for was repairing my drill press’s table. I’d broken it when I was using it as a press for assembling Ringo’s Powerglide transmission. Cast iron, which the table is, does not like to be welded, so I’ll need to take it easy on the table – no more using it as a press.
Here’s the latest from the rest of the fleet.
Heidi – Other than the defroster cable recently breaking, she’s behaving admirably.
Ringo – Broke a fan belt on Ariel’s drive home from work last night. Fortunately, she was nearing the house at the time, so it was a short drive to get to the car and swap in a replacement. I still need to keep a closer watch on that engine’s propensity to eat belts.
Luna – Started right up when it was time to park her in the garage during hurricane Sandy’s visit to our neighborhood. She behaved once again when it was time to move her back into the driveway. She’s now got two layers of tarp tied tightly over her. This will have to do until Lucy leaves the garage.
Glinda – Has developed a new noise emanating from the engine area. I think it’s developing an exhaust leak, but I can’t pinpoint the origin. I asked Victoria to make sure her CO detector was properly functioning and to let me know if the sound’s intensity increases. The only other attention she demanded was tweaking the left rear taillight/brakelight socket to fix an intermittent illumination of the taillight bulb. Victoria and I have been tracking Glinda’s fuel mileage. Lately, she’s been averaging around 18 mpg – a large improvement from 13 she was getting a few months back. I think the big difference-maker was the rebuilt distributor.
Wilma – Prior to hurricane Sandy’s arrival, I moved the portable garage back against the inoperative door of my permanent garage and anchored down the four corners. Additionally, I tied the frame to Wilma’s front bumper in hopes that everything would still be there the morning after. Thankfully, we fared much better than all the dire warnings had said we would. Wilma stayed dry.
YellowVert – It looks like she’ll be heading to her new home in Delaware tomorrow morning. I struck a deal with a guy who hopes to restore her. I’m relieved that I didn’t have to scrap her since ridding her of her rusty portions doesn’t appear to be that daunting an effort. I’m still left with the bright blue interior that I’ll peddle online.

Here’s the latest from the rest of the fleet.
Heidi – Other than the defroster cable recently breaking, she’s behaving admirably.
Ringo – Broke a fan belt on Ariel’s drive home from work last night. Fortunately, she was nearing the house at the time, so it was a short drive to get to the car and swap in a replacement. I still need to keep a closer watch on that engine’s propensity to eat belts.
Luna – Started right up when it was time to park her in the garage during hurricane Sandy’s visit to our neighborhood. She behaved once again when it was time to move her back into the driveway. She’s now got two layers of tarp tied tightly over her. This will have to do until Lucy leaves the garage.
Glinda – Has developed a new noise emanating from the engine area. I think it’s developing an exhaust leak, but I can’t pinpoint the origin. I asked Victoria to make sure her CO detector was properly functioning and to let me know if the sound’s intensity increases. The only other attention she demanded was tweaking the left rear taillight/brakelight socket to fix an intermittent illumination of the taillight bulb. Victoria and I have been tracking Glinda’s fuel mileage. Lately, she’s been averaging around 18 mpg – a large improvement from 13 she was getting a few months back. I think the big difference-maker was the rebuilt distributor.
Wilma – Prior to hurricane Sandy’s arrival, I moved the portable garage back against the inoperative door of my permanent garage and anchored down the four corners. Additionally, I tied the frame to Wilma’s front bumper in hopes that everything would still be there the morning after. Thankfully, we fared much better than all the dire warnings had said we would. Wilma stayed dry.
YellowVert – It looks like she’ll be heading to her new home in Delaware tomorrow morning. I struck a deal with a guy who hopes to restore her. I’m relieved that I didn’t have to scrap her since ridding her of her rusty portions doesn’t appear to be that daunting an effort. I’m still left with the bright blue interior that I’ll peddle online.
Tuesday, October 23, 2012
No Spares is a Tenuous Situation
I’m praying I don’t jinx myself by posting the following bit of information. The lovely Loriann is relying on an eighteen year old vehicle with a wobble and over 318,000 miles as her daily-driver while I do battle with her PT Cruiser. My daily-driver is the ever-faithful Heidi while Lucy languishes in the driveway with most of her interior bits piled on her roof (this really needs a photo). The PT Cruiser work is a not-so-simple timing belt change, while Lucy awaits the welding in of floor patches. Tonight is crunch time on the Cruiser with high hopes for completion.
It hasn’t been all house-painting (the other massive consumer of my limited time away from work and family) and swearing at Chrysler engineers. I’ve had some time for ‘vairs and garage. When last I posted (which was too long ago), I’d filled a cart with discarded engine parts. The next night I promised a fellow CORSA of Baltimore club member my perceived expertness in getting his Corsa on the road. He’d had the electronic ignition quit on him, so he was reverting back to the tried-and-true points and condenser. Simplistically, a running engine is an equation consisting of compression, spark, and fuel. Since the car ran fine before the electronics crapped out, we assumed the compression part was good. I was able to get the spark part working using the instructions found here. Since the car had sat for a few months, the fuel part was missing. We tried a few cranking sessions without seeing any fuel squirting from the primary carburetors. Since my bedtime was quickly approaching, we called it a night with the fun and games to continue in two weeks.
Thursday, I received a hopeful e-mail in reply to my YellowVert Craigslist ad. Subsequent back-and-forth resulted in James’ arrival at fleet headquarter that afternoon. He shared how he was shopping for a father-son project, but knew nothing about Corvairs. So I did a sell job going so far as taking him for a spin around the neighborhood in Glinda. By the end of our drive I’d dropped the price to $300 minus the second interior and he seemed ready to pull the trigger, but instead of saying, “I’ll take it,” he asked me, “Would you be willing to take payments?” He went on to explain that’s the only way his wife would let him get the car. I had to tell him no since I still had some other parties interested. He left me with a request I reconsider his offer if none of the other parties comes through. Sadly, those other parties haven’t come through. Someone e-mailed with me Sunday with everything all set for him to drive out that afternoon and give me a deposit to hold the car for him, but all of my high hopes came crashing down when a final e-mail showed up telling me his buddy told him he was paying too much for the car. I responded that his buddy was wrong and the $300 I’d come down to was a good deal considering I could part out the car selling and then still get $200 from the scrap-man. Oh well, it’s looking more and more like I’ll be removing her engine, cutting off fenders and such, and hauling her to the ranch.
Thursday evening I rolled Lucy out of the garage and stapled up the insulation I’d purchased a week back. That project went well other than some of the long boards and pipes I’d been storing in the rafters would not go back up since the insulation was taking up space they’d previously been using. Oh well, I love a storage challenge – NOT! I spent the rest of the evening moving more stuff around making room for the PT Cruiser project.
Lucy had been garaged for a couple reasons. First, the aforementioned missing metal in the floor. Second, the forcible expulsion of spark plug number four from its threaded home. The latter issue was corrected Saturday morning by the tapping of the stripped hole and subsequent installation of a K-D insert. Like nearly every other project I undertake, this one was not without its frustration. Following the recommendations I’d read on a Corvair Center forum thread, I rotated the engine until the rotor was pointed at the number four cap terminal. Then, to capture all the chips from tapping, I filled the combustion chamber with shaving cream and gave the tap a healthy coat of grease. I slowly turned the tap in the hole, being careful to keep the driven end centered in the hole in the engine cover. After a few turns, I’d back out the tap, clean out the chips, recoat, and cut a few more turns. After repeating these steps about a dozen more times, the tap was turning freely indicating I now had new threads along the hole’s entire length. With a smaller hose attached to the end of the shop vac, I sucked out the shaving cream and then cleaned out the threads with a solvent-soaked rag. The instructions that came with the insert directed me to spin the insert onto a spark plug, coat the external threads with the included sealer, and install the spark plug until it bottomed out. I did all that, but, inexplicably, the plug didn’t go in as far as I’d expected before it became really difficult to torque. I gave it a few more turns using some serious effort before calling good-to-go. Fearing I’d just back out the insert, I left the plug installed and patted myself on the back for deciding to use a new plug since it may be stuck in the head until I have to do an engine rebuild. I finished up the effort by installing new plugs in the rest of the holes. After pouring a little gas down a carb’s throat the engine started right up, and, if not for the clatter of a lazy lifter, she was running as good as she ever did.
The rest of Saturday’s garage time was devoted to the PT Cruiser so, other than reiterating what a struggle it is working within a VERY confining engine compartment, I’ll leave this non-Corvair missive for a different outlet.
Tuesday, October 16, 2012
Out With The Trash
Last night I carved out some more floor space in my garage by going through the ’64 110HP that came as part of Phil’s collection. This was the one that had water in it. The rust-free crank and camshaft are keepers and went with the other GUPs on the shelves. The heads looked usable, so they joined some of their brothers on the shelf. Some of the valvetrain components went into a box along with head nuts and lockwashers. Finally, the shrouds, which had good seals on them, were jammed on the shelf of sheetmetal. Everything else was tossed into our garden cart for a ride to the recycler.
Speaking of recycler, they get forty cents a pound for pure aluminum. Now I have to remove the studs and other steel from the engine case halves and rear cover in order to collect. Otherwise, I’ll only get ten cents a pound. Once I tear down Ringo’s old engine, also a ’64 110, I figure I may have ten bucks of future soda cans.
Speaking of recycler, they get forty cents a pound for pure aluminum. Now I have to remove the studs and other steel from the engine case halves and rear cover in order to collect. Otherwise, I’ll only get ten cents a pound. Once I tear down Ringo’s old engine, also a ’64 110, I figure I may have ten bucks of future soda cans.
Monday, October 15, 2012
Pullin’ Parts
Any afternoon pulling parts off of Corvairs is better than a few hours of employment, so I took last Friday afternoon off and spent it at the Corvair Ranch with Ken, a ‘vair good buddy of mine. I’d put together a list of bits and pieces I wanted to remove from PartsWagon and PartsCoupe. With Ken’s urging, for every part on the list we were able to unbolt, there was another part I just couldn’t leave behind. Three hours later we had the Suburban filled. Parts of note include PartsWagon’s rear hatch, engine cover, windshield, windshield trim, back seat, bumpers, the extremely fragile hatch covers, and a trailer hitch. The latter may come in handy if I do follow through with cool dream number two-hundred-thirty-one (a trailer made from a wagon’s rear half).
One item that really intrigued me, but which I was unable to remove was an aftermarket radio housing in PartsCoupe. In EMs, the radio is mounted in a separate sheetmetal enclosure that hangs under the center section of the dash. PartsCoupe’s radio was a period-correct Motorola AM/FM with a smaller display area than the stock GM of the time. To accommodate the size difference some company created a radio house that looked factory – it bolted to the dash and was painted. Not that I’d have a use for it, but it was unique and cool. Maybe next time I’ll try harder.
I spent a majority of Friday evening’s garage time unloading the Suburban moving all the parts into Wilma. Once empty, the truck got a thorough vacuuming.
With an hour or so left before bedtime, I moved on to YellowVert. Noone’s come forward wanting to buy her, so I’ve decided to part her out and the sooner the better. The first response to my revised post on the Corvair Center Forum asked for a second of the passenger side fender. The interested party is repairing some collision damage on an LM and needs some good, solid metal for the job. Since I don’t have a key to let me in the trunk, I removed the left front headlight bucket and unscrewed the two bolts holding the latch to the hood. Amongst the acorns and mouse-nest was, what appears to be, a new back window for a convertible top all rolled up in its original plastic packaging. I was more interested in the condition of the trunk, so I didn’t take it out to judge its condition. Could be a treasure.
One item that really intrigued me, but which I was unable to remove was an aftermarket radio housing in PartsCoupe. In EMs, the radio is mounted in a separate sheetmetal enclosure that hangs under the center section of the dash. PartsCoupe’s radio was a period-correct Motorola AM/FM with a smaller display area than the stock GM of the time. To accommodate the size difference some company created a radio house that looked factory – it bolted to the dash and was painted. Not that I’d have a use for it, but it was unique and cool. Maybe next time I’ll try harder.
I spent a majority of Friday evening’s garage time unloading the Suburban moving all the parts into Wilma. Once empty, the truck got a thorough vacuuming.
With an hour or so left before bedtime, I moved on to YellowVert. Noone’s come forward wanting to buy her, so I’ve decided to part her out and the sooner the better. The first response to my revised post on the Corvair Center Forum asked for a second of the passenger side fender. The interested party is repairing some collision damage on an LM and needs some good, solid metal for the job. Since I don’t have a key to let me in the trunk, I removed the left front headlight bucket and unscrewed the two bolts holding the latch to the hood. Amongst the acorns and mouse-nest was, what appears to be, a new back window for a convertible top all rolled up in its original plastic packaging. I was more interested in the condition of the trunk, so I didn’t take it out to judge its condition. Could be a treasure.
Thursday, October 11, 2012
Dealing with a Beast
Tuesday night I unloaded the compressor tank from the back of the Surburban – it must weigh a couple hundred pounds. With Victoria’s able help, it’s now safely on the concrete of the driveway. Now I have a number of hurdles to go over before it becomes part of my air supply. First, I need to make sure it’s safe by conducting a hydrostatic test. That is done by: plugging all the outlets in the tank buy one, orientating the tank so that the one open hole is at the highest point, filling the tank completely with water, screwing in a Schrader valve fitting, pressuring the water to roughly 200 psi (150% max), looking for leaks. Once I’ve proven the tank’s not going to kill anyone, I’ll drain the water, brush off any loose rust and shoot some Rustoleum primer all over it followed by a coat of paint that causes it to blend in with the brick wall of the garage that it’ll be sitting in front of. Then it’s just a matter of moving it into place and plumbing it into the system. After searching the web and questioning my car buddy, I’ll be putting the tank in-line as opposed to connecting it with a T fitting.
Part of Tuesday’s antics included moving Luna out of the driveway. In order to do this, I had to deal with replacing the fuel pump. As reported a couple weeks ago, Luna’s carbs weren’t getting any gas after I installed a replacement fuel pump. Since we’d put about five gallons of gas in her tank before her test drives, I assumed there was plenty left in the tank and the issue was with the pump. So, I installed a different new pump that had showed up with Phil’s stuff, primed the carbs, and started the engine. It took a few times of unsuccessfully seeing gas squirting before I decided to make sure there really was gas in the tank. While blowing air back through the fuel line leading to the tank, I had Victoria listen for bubbles – nothing. After pouring a couple gallons of 87 octane into the empty chamber, lo and behold the engine ran, the pump pumped … and leaked. Irrr. A few turns on each of the screws that hold the pump together and the dripping ceased. Success … in a way. Where did all the gas go? Could it have really all evaporated during Luna’s extensive inactivity? I carefully searched for dripping fuel and could find none. We’ll know more once she gets her new top installed and is on the road as a daily-driver.
Last night, being one of my two designated garage nights, was spent dealing with more garage things. I believe all I accomplished was making a larger mess of the space. I picked up some free insulation yesterday and it’s now piled on top of Lucy. Looks like it’ll just fit between the roof rafters. Any help will be appreciated with winter just around the corner. Now I just need to find time to staple it up. I also took some time to deal with the beast of an air tank. After moving it out of the middle of the driveway, I removed the lower drain plug and was thankful when no water came out. There was some powdery rust residue, but not too much. I am a lot of confidence the tank will past testing. I also removed the other fittings and created a mental list (uh-oh) of the plugs and caps necessary to close off every port. The only unknown is how to connect the top port to a pressure source. I’m sure I’ll do my typical thirty minutes of pawing through all the brass and iron fittings at Home Depot.
My last effort of the evening was actually car-related. I popped the engine lid on YellowVert and put wrench to harmonic balancer bolt and successfully rotated the engine. Feeling the euphoria of learning the engine was not seized, I endeavored to the pull the spark plugs with the plan of doing a compression test on each of the six combustion chambers. After removing the three plug wires from the driver’s side, I was greeted by the sight of more acorns. When vacuuming failed to get them out, I decided the car will be sold as-is. I’ll throw the acorns in for free.
Part of Tuesday’s antics included moving Luna out of the driveway. In order to do this, I had to deal with replacing the fuel pump. As reported a couple weeks ago, Luna’s carbs weren’t getting any gas after I installed a replacement fuel pump. Since we’d put about five gallons of gas in her tank before her test drives, I assumed there was plenty left in the tank and the issue was with the pump. So, I installed a different new pump that had showed up with Phil’s stuff, primed the carbs, and started the engine. It took a few times of unsuccessfully seeing gas squirting before I decided to make sure there really was gas in the tank. While blowing air back through the fuel line leading to the tank, I had Victoria listen for bubbles – nothing. After pouring a couple gallons of 87 octane into the empty chamber, lo and behold the engine ran, the pump pumped … and leaked. Irrr. A few turns on each of the screws that hold the pump together and the dripping ceased. Success … in a way. Where did all the gas go? Could it have really all evaporated during Luna’s extensive inactivity? I carefully searched for dripping fuel and could find none. We’ll know more once she gets her new top installed and is on the road as a daily-driver.
Last night, being one of my two designated garage nights, was spent dealing with more garage things. I believe all I accomplished was making a larger mess of the space. I picked up some free insulation yesterday and it’s now piled on top of Lucy. Looks like it’ll just fit between the roof rafters. Any help will be appreciated with winter just around the corner. Now I just need to find time to staple it up. I also took some time to deal with the beast of an air tank. After moving it out of the middle of the driveway, I removed the lower drain plug and was thankful when no water came out. There was some powdery rust residue, but not too much. I am a lot of confidence the tank will past testing. I also removed the other fittings and created a mental list (uh-oh) of the plugs and caps necessary to close off every port. The only unknown is how to connect the top port to a pressure source. I’m sure I’ll do my typical thirty minutes of pawing through all the brass and iron fittings at Home Depot.
My last effort of the evening was actually car-related. I popped the engine lid on YellowVert and put wrench to harmonic balancer bolt and successfully rotated the engine. Feeling the euphoria of learning the engine was not seized, I endeavored to the pull the spark plugs with the plan of doing a compression test on each of the six combustion chambers. After removing the three plug wires from the driver’s side, I was greeted by the sight of more acorns. When vacuuming failed to get them out, I decided the car will be sold as-is. I’ll throw the acorns in for free.
Subscribe to:
Posts (Atom)